 |
|
|
|
|
Szczegóły Produktu:
Zapłata:
|
| nazwa: | Termopara rtd oporowa na temperaturę pt100 | rozmiar przewodnika: | 0,75 mm2 (3*7/0,37 mm) |
|---|---|---|---|
| Materiał izolacji i kurtki: | Folia Kapton (maks. 200 stopni Celsjusza) | Kształt: | okrągły |
| Dokładność: | Klasa I (T±4%) | Zakres temperatury: | -10 do +260°C |
| High Light: | Kabel termopary Rtd,czujnik temperatury pieca grzewczego Pt100,kabel termopary oporności termicznej |
||
Thermal resistance rtd thermocouple pt100 heat furnace temperature sensor
Specifications
1.Style:Compensation Wire
2.Thermocouple RTD wire
3 wire stainless steel probe high temperature thermocouple RTD sensores PT 100
Thermocouple RTD wire Classification
1. Thermocouple level (high temperature level). This type of thermocouple wire is mainly suitable for thermocouple type K, J, E, T, N and L and other high temperature detection instrument, temperature sensor, etc.
2. Compensating wire level (low temperature level). This type of thermocouple wire is mainly suitable for compensating cable and extension wire of various thermocouples of type S, R, B, K, E, J, T, N and L, heating cable, control cable and so on.
| Thermocouple Variety and Index | ||
| Variety | Type | Measurement Range(°C) |
| NiCr-NiSi | K | -200-1300 |
| NiCr-CuNi | E | -200-900 |
| Fe-CuNi | J | -40-750 |
| Cu-CuNi | T | -200-350 |
| NiCrSi-NiSi | N | -200-1300 |
| NiCr-AuFe0.07 | NiCr-AuFe0.07 | -270-0 |
3 . Dimensions and Tolerance of Fiberglass Insulated Thermocouple Wire
Dimensions / Tolerance mm ) : 4.0+-0.25
Color code & initial calibration tolerances for thermocouple wire
| Thermocouple Type | ANSI Color Code | Initial Calibration Tolerances | ||||
| Wire Alloys | Calibration |
+/- Conductor |
Jacket | Temperature Range |
Standard Limits |
Special Limits |
|
Iron(+) vs. Constantan(-) |
J | White/Red | Brown |
0°C to +285°C 285°C to +750°C |
±2.2°C ± .75% |
±1.1°C ± .4% |
|
CHROMEL(+) vs. ALUMEL(-) |
K | Yellow/Red | Brown |
-200°C to -110°C -110°C to 0°C 0°C to +285°C 285°C to +1250°C |
± 2% ±2.2°C ±2.2°C ± .75% |
±1.1°C ± .4% |
|
Copper(+) vs. Constantan(-) |
T | Blue/Red | Brown |
-200°C to -65°C -65°C to +130°C 130°C to +350°C |
± 1.5% ±1°C ± .75% |
± .8% ± .5°C ± .4% |
|
CHROMEL(+) vs. Constantan(-) |
E | Purple/Red | Brown |
-200°C to -170°C -170°C to +250°C 250°C to +340°C 340°C+900°C |
± 1% ±1.7°C ±1.7°C ± .5% |
±1°C ±1°C ± .4% ± .4% |
Color Code & Initial Calibration Tolerance for Extension Wire
| Extension type | ANSI Color Code | Initial Calibration Tolerances | ||||
| Wire Alloys | Calibration |
+/- Conductor |
Jacket | Temperature Range |
Standard Limits |
Special Limits |
| Iron (+) vs. Constantan(-) | JX | White/Red | Black | 0°C to +200°C | ±2.2°C | ±1.1°C |
| CHROMEL (+) vs. ALUMEL (-) | KX | Yellow/Red | Yellow | 0°C to +200°C | ±2.2°C | ±1.1°C |
| Copper(+) vs. Constantan(-) | TX | Blue/Red | Blue | -60°C to +100°C | ±1.1°C | ± .5°C |
| CHROMEL(+) vs. Constantan(-) | EX | Purple/Red | Purple | 0°C to +200°C | ±1.7°C | ±1.1°C |
PVC-PVC Physical Properties
| characteristics | Insulation | jacket |
| Abrasion Resistance | Good | Good |
| Cut Through Resistance | Good | Good |
| Moisture Resistance | Excellent | Excellent |
| Solder Iron Resistance | Poor | Poor |
| Service Temperature |
105℃ continuous 150℃ single |
105℃ continuous 150℃ single |
| Flame Test | Self-extinguishing | Self-extinguishing |
Osoba kontaktowa: Mr. Qiu
Tel: +8613795230939
